Refining and distilling
A mixture is heated so its parts boil off at different temperatures, or treated so the impurities drop out. What remains is purer and worth more.
105 lines that use it
Acetic anhydride
Acetone
Acrylic acid
Air
Argon
Asphalt
Baking soda
Benzene
Bourbon
Caffeine
Carbon monoxide
Caustic soda
Cobalt
Cocoa butter
Coconut oil
Cognac
Condensed milk
Copper
Corn syrup
Diesel fuel
Ethanol
Ethylene
Ethylene glycol
Gallium
Gasoline
Gelatin
Germanium
Gin
Glycerin
Gold
Hexane
Hydrogen
Hydrogen peroxide
Ibuprofen
Indium
Instant coffee
Insulin
Jam
Jet fuel
Lead
Licorice
Margarine
Mercury
Metallurgical silicon
Methanol
Mezcal
Motor oil
Mouthwash
mRNA vaccine
Naphtha
Natural gas
Neon
Neon sign
Nickel
Nitric acid
Nitrogen gas
Orange juice
Oxygen gas
Palm oil
Para-xylene
Paraffin wax
Penicillin
Pentane
Perfume
Petroleum coke
Phenol
Pig iron
Plasticizer
Polyethylene
Polypropylene
Polysilicon
Polystyrene
Polyvinylpyrrolidone
Powdered milk
Propane
Propylene
Quartz
Railroad rail
Refrigerant
Rum
Scotch whisky
Silicone
Silver
Soap
Soda ash
Stainless steel
Steel
Styrene
Sugar
Sulfur
Super glue
Synthetic rubber
Table salt
Tequila
Titanium
Titanium dioxide
Toluene
Tonic water
Trichlorosilane
Vegetable oil
Vodka
Whiskey
White chocolate
Wood pulp
Zinc
What it looks like on the line
- TolueneDistill the three apart. Distillation columns split the BTX stream by boiling point. This one boils at 110.6 °C, between its two siblings, and comes off the column as a colorless liquid.
- TrichlorosilaneDistill away the by-products. Silicon tetrachloride, hexachlorodisilane and dichlorosilane are the main by-products. Distillation separates the trichlorosilane from them.
- NickelTurn it to a gas and back. In the Mond process, nickel is treated with carbon monoxide and forms nickel carbonyl gas. Heating the gas makes it fall apart, depositing pure nickel onto pellets that are constantly stirred.
- PlasticizerSeparate the ortho-xylene. Reforming naphtha gives a mix of aromatics, and this one isomer is split out. It has slowly displaced naphthalene as the feedstock, partly because it is easier to transport.
- Condensed milkBoil off the water. Water is evaporated under vacuum, which lets milk reduce without scorching or curdling. Roughly 60 percent of the water leaves.
- AcetoneSeparate in columns. Distillation pulls apart the mixture. This product boils first, at 56.2 °C, far below phenol, so it comes off the top as a clear and flammable liquid.
- Vegetable oilSteam out the smell. The oil is heated under vacuum to roughly 232 °C while steam is bubbled through from the bottom. The steam carries off volatile compounds that would taste or smell like beans. Deodorization is a core step in producing refined oil.
- AirDistill the gases apart. Nitrogen boils at 77.4 K, argon at 87.3 K and oxygen at 90.2 K, so the columns peel them off in order. Argon builds up in the middle of the low-pressure column, where a side draw collects it.
- Vegetable oilBleach out the color. A clay-like bleaching earth adsorbs the pigments, and filtering leaves the pale gold color shoppers expect.
- PhenolDistill the two apart. Columns separate acetone, phenol and left-over cumene. Unused cumene returns to the start of the line.
- LicoriceDraw out the sweet extract. The sweet, aromatic part of the root is pulled out as a concentrated dark extract. The main sweet compound is glycyrrhizin, and its flavor builds slowly and lingers longer than sugar does.
- Diesel fuelDraw the middle cut. In the distillation tower, diesel condenses between kerosene above it and heavier gas oil below it. At normal pressure it boils off between 200 and 350 °C, and its molecules have 9 to 25 carbon atoms.